🖨️ 3D Print Tools · Easy Support rev 104
Model  Support  Contact patch
L-drag orbit Mid-drag pan Wheel zoom
⏳ Computing supports…
Generate
Modify existing
Down-facing surfaces overhanging more than this from vertical get supports (45° = the classic rule).
Grid pitch between support pillars. Larger = fewer supports.
Tip contact area vs. a standard flat tip. 4× → half the tip diameter.
A normal support's contact diameter. The slim tip = this ÷ √(reduction).
Pillar base diameter for stability. Tips taper up to the slim contact.
Works when the file contains supports as a separate object (multi-body .3mf). Tick the objects that are supports, then pinch their top contact band.
Load a file to list its objects…
Height below each support's top that gets tapered inward.